01482 223353 [email protected]
Menu

Latest News

Type 5as Marine Lighting

Type 5A

By | Marine Lighting | No Comments
  • CR4 mild steel gear tray
  • Vacuum-formed diffuser
  • Heat resistant PVC wire to 105 degrees

Suitable for use on deck and in holds, the Type 5A fitting has a body and bezel fabricated from 316 Marine Grade stainless steel. The CR4 mild steel removable gear tray is powder coated in white with a thickness of 70 – 80µm. The vacuum-formed clear polycarbonate diffuser is held in place by bezel and heavy duty brass bolts.

Type 1B Marine Lighting

Type 1B

By | Marine Lighting | No Comments
  • Powder coated white 70 – 80µm
  • Removable gear tray
  • Heat resistant PVC wire to 105 degrees

Marine lighting product for use in engine rooms, machinery spaces, stores and workshops. Comes with a formed mild steel case and gear tray, an injection-moulded clear polycarbonate diffuser, held in place by four stainless steel toggle latches.

Ulyssees Vandal Resistant Lighting

Ulysses

By | Vandal Resistant Lighting | No Comments
  • Slide-in polycarbonate controller
  • High frequency electronic gear
  • Secure anti-ligature design
  • Excellent photometric performance

This is a range of ceiling-mounting T5 or T8 fluorescent vandal-resistant luminaires, designed for cell requirements in prisons and other secure environments. The luminaire uses T8 fluorescent tubes with high frequency electronic control gear. The combination of mild steel bodies and endcaps ensure a tight fit, to help reduce the risk of ligature problems.
The diffuser can be supplied with opal or prismatic 3mm thick polycarbonate. The geartray is made of white powder coated mild steel and is removable for ease of maintenance. The screws holding the endcaps are stainless steel high security Allen type with central pin as standard. The diffuser slides in from one end to maintain the resistance to attack.

To view the full data sheet click here

Sapphire Vandal Resistant Lighting

Sapphire

By | Vandal Resistant Lighting | No Comments
  • 3mm or 5mm polycarbonate controller
  • High frequency electronic gear
  • Vandal resistant design
  • Secure anti-ligature frame design
  • Excellent photometric performance

These vandal-resistant luminaires are designed for use in areas where resilience is important, and there are various options of light source available to enable a suitable balance between efficiency and lighting effect.
Cornice mounting fluorescent range of shallow vandal resistant luminaires designed for commercial, hospital, and educational environments. The luminaire uses T5 high efficiency fluorescent tubes with high frequency electronic control gear. The combination of mild steel bodies and frames ensures a tight fit, to help reduce the risk of ligature problems.
The diffuser can be supplied with opal or prismatic 3mm or 5mm thick polycarbonate. The geartray is made of white powder coated mild steel and is removable for ease of maintenance. The screws holding the frame are stainless steel high security Allen type with central pin as standard.

To view the data sheet click here

Diamond Vandal Resistant Lighting

Diamond

By | Vandal Resistant Lighting | No Comments
  • Polycarbonate diffuser
  • High frequency electronic gear
  • Vandal resistant design
  • IP54 design
  • Excellent photometric performance

These vandal-resistant luminaires are designed for use in areas where resilience is important, such as association and activity areas. There are various options of light source available to enable a suitable balance between efficacy and effect to be achieved.
Surface-mounting fluorescent range of shallow vandal resistant luminaires designed for commercial, prison, and other public environments. The luminaire uses T5 high efficacy fluorescent tubes with high frequency electronic control gear. The combination of mild steel bodies and frames, polycarbonate diffuser, and tamper proof bolts ensures a strong enclosure.
The geartray is made of white powder coated mild steel and is removable for ease of maintenance. The screws holding the frame are stainless steel high security Allen type with central pin as standard.

To view the full data sheet click here

CardiLED Office LED Lighting

CardiLED Recessed Direct-Indirect Range

By | In The Spotlight, Office Lighting, Retail Lighting | No Comments
  • Low Glare Gull-Wing Body
  • High Frequency Electronic Gear
  • Pleasing Soft Light Effect
  • Excellent Photometric Performance

Recessed fluorescent modular range of decorative luminaires designed for commercial environments, now with state-of-the art LED capabilities. The luminaire uses compact lamps with high frequency electronic control gear. The gull-wing reflector gives a soft light distribution and is made from shaped powder coated mild steel, whilst the central perforated cylinder hides the lamps from direct view. The luminaires are designed for use in those areas where aesthetic appearance is important, and there are various options of light source available to enable a suitable balance between efficacy and effect to be achieved.

Kino III Factory Lighting

Kino III Surface or Suspended Range

By | Factory Lighting, In The Spotlight, Warehouse Lighting | No Comments
  • Latest lamp technology means high efficacy
  • HF Electronic Control Gear
  • Easy Installation
  • Extremely Low Profile
  • High Impact Resistance

A unique range of fluorescent luminaires for mounting in school gymnasia and commercial sports halls. The luminaire uses high efficiency lamps with high frequency electronic control gear.

The body is made from white textured powder coated mild steel, and has polished aluminium reflectors to ensure maximum light output. The front cover is made from clear polycarbonate to resist impact from balls and other games objects. There are various sizes available to enable applications to be illuminated without dark patches between adjacent luminaires.

Magnatron LED Office Lighting

MagnaLED

By | In The Spotlight, Office Lighting | No Comments
  • Excellent Photometric Performance

This is a range of modular, decorative luminaires designed for commercial environments, now available with LED lights. The luminaire incorporates compact and high-efficiency LED lamps with a high frequency electronic control gear. The reflective body housing is made from powder coated mild steel, whilst the 65deg louvre is manufacture in MIRO satin anodised aluminium.

The Magnatron range of luminaires are designed for use in office areas where aesthetics and efficiency are of prime important and there are various options of light source available to enable a suitable balance between efficacy, conformity in line with LG7 and the desired visual effect.

Saffron LED Office Lighting

Saffron

By | In The Spotlight, Office Lighting | No Comments
  • Low Glare 65deg louvre
  • High Frequency Electronic Gear
  • Modern Design
  • Surface/Suspension Options
  • Excellent Photometric Performance

This is a range of very attractive direct/indirect fluorescent luminaires designed for commercial, hospital, and educational environments. The luminaire uses T5 high efficiency fluorescent tubes with high frequency electronic control gear.

The combination of direct louvre controlled light distribution, together with indirect ceiling wash, enables the luminaire to be used in VDU areas. Where the ceiling height allows, the luminaire can be suspended by two matching tubes, which gives better ceiling illumination.

The shallow powder-coated mild steel geartray keeps the luminaire depth to an absolute minimum. The luminaires are designed for use in those areas where aesthetic appearance is important.

The data sheet can be found here

Get in touch today to dicuss your lighting requirements further Contact Us