01482 223353 [email protected]
Menu

Latest News

Products - Page 3 of 4 - Sondia Lighting

Batwing Retail Lighting

Batwing

By | Retail Lighting | No Comments

Low Glare Perforated Controller
• High Frequency Electronic gear
• Soft lighting effect
• Steel construction
• Excellent Photometric performance

Surface linear range of up and downlight luminaires designed for commercial, hospital and educational environments.

The luminaire uses T5 high efficiency fluorescent tubes with high frequency electronic control gear. The combination of perforations on the controller and reflected light off the gull wing reflectors gives a soft light distribution.

The shallow powder coated mild steel construction keeps the luminaire depth to an absolute minimum. The luminaires are designed for use in those areas where aesthetic appearance is important and there are various options of light source available to enable a suitable balance between efficacy and effect to be achieved.

To view the full datasheet click here

Type 21 Sign Lighting

Type 21

By | Sign Lighting | No Comments
  • Bright anodised aluminium reflector.
  • Heat resistant PVC wire to 105 degrees.
  • 220/240V 50/60Hz

Sign illuminating and flood lighting application with injection moulded polycarbonate. Clear polycarbonate injection moulded diffuser, hinged and secured with two screws.

Type 19 Sign Lighting

Type 19

By | Sign Lighting | No Comments
  • Adjustable angle from 0-45 degrees
  • Lightweight & non-corrosive aluminium construction
  • Low running and maintenance costs

The Type 19 offers more even light distribution than some alternative methods of illumination. It features electronic starters fitted for smooth tube ignition in cold conditions & extended tube life. Its specially-designed profile provides optimum internal reflection & slimline appearance. This unit comes in a standard gloss white colour.

To view the full data sheet click here

Type 6DA300R Marine Lighting

Type 6DA300

By | Marine Lighting | No Comments
  • Compatible with most makes of marine modular ceilings
  • Supplied with mounting brackets
  • Range of applications

The Type 6DA300 marine lighting fitting is suitable for use in accommodation areas, cabins, dining rooms and public rooms. Its formed mild steel phosphate-coated case and prismatic acrylic diffuser offer a hard-wearing and durable product for a variety of challenging conditions.
The unit comes finished in stove enamelled white 70 – 80µm and with heat-resistant PVC wire to 105 degrees.

Type 5as Marine Lighting

Type 5A

By | Marine Lighting | No Comments
  • CR4 mild steel gear tray
  • Vacuum-formed diffuser
  • Heat resistant PVC wire to 105 degrees

Suitable for use on deck and in holds, the Type 5A fitting has a body and bezel fabricated from 316 Marine Grade stainless steel. The CR4 mild steel removable gear tray is powder coated in white with a thickness of 70 – 80µm. The vacuum-formed clear polycarbonate diffuser is held in place by bezel and heavy duty brass bolts.

Type 1B Marine Lighting

Type 1B

By | Marine Lighting | No Comments
  • Powder coated white 70 – 80µm
  • Removable gear tray
  • Heat resistant PVC wire to 105 degrees

Marine lighting product for use in engine rooms, machinery spaces, stores and workshops. Comes with a formed mild steel case and gear tray, an injection-moulded clear polycarbonate diffuser, held in place by four stainless steel toggle latches.

Ulyssees Vandal Resistant Lighting

Ulysses

By | Vandal Resistant Lighting | No Comments
  • Slide-in polycarbonate controller
  • High frequency electronic gear
  • Secure anti-ligature design
  • Excellent photometric performance

This is a range of ceiling-mounting T5 or T8 fluorescent vandal-resistant luminaires, designed for cell requirements in prisons and other secure environments. The luminaire uses T8 fluorescent tubes with high frequency electronic control gear. The combination of mild steel bodies and endcaps ensure a tight fit, to help reduce the risk of ligature problems.
The diffuser can be supplied with opal or prismatic 3mm thick polycarbonate. The geartray is made of white powder coated mild steel and is removable for ease of maintenance. The screws holding the endcaps are stainless steel high security Allen type with central pin as standard. The diffuser slides in from one end to maintain the resistance to attack.

To view the full data sheet click here

Sapphire Vandal Resistant Lighting

Sapphire

By | Vandal Resistant Lighting | No Comments
  • 3mm or 5mm polycarbonate controller
  • High frequency electronic gear
  • Vandal resistant design
  • Secure anti-ligature frame design
  • Excellent photometric performance

These vandal-resistant luminaires are designed for use in areas where resilience is important, and there are various options of light source available to enable a suitable balance between efficiency and lighting effect.
Cornice mounting fluorescent range of shallow vandal resistant luminaires designed for commercial, hospital, and educational environments. The luminaire uses T5 high efficiency fluorescent tubes with high frequency electronic control gear. The combination of mild steel bodies and frames ensures a tight fit, to help reduce the risk of ligature problems.
The diffuser can be supplied with opal or prismatic 3mm or 5mm thick polycarbonate. The geartray is made of white powder coated mild steel and is removable for ease of maintenance. The screws holding the frame are stainless steel high security Allen type with central pin as standard.

To view the data sheet click here

Diamond Vandal Resistant Lighting

Diamond

By | Vandal Resistant Lighting | No Comments
  • Polycarbonate diffuser
  • High frequency electronic gear
  • Vandal resistant design
  • IP54 design
  • Excellent photometric performance

These vandal-resistant luminaires are designed for use in areas where resilience is important, such as association and activity areas. There are various options of light source available to enable a suitable balance between efficacy and effect to be achieved.
Surface-mounting fluorescent range of shallow vandal resistant luminaires designed for commercial, prison, and other public environments. The luminaire uses T5 high efficacy fluorescent tubes with high frequency electronic control gear. The combination of mild steel bodies and frames, polycarbonate diffuser, and tamper proof bolts ensures a strong enclosure.
The geartray is made of white powder coated mild steel and is removable for ease of maintenance. The screws holding the frame are stainless steel high security Allen type with central pin as standard.

To view the full data sheet click here

Get in touch today to dicuss your lighting requirements further Contact Us